MSS SP-75 High-Strength, Wrought, Butt-Welding Fittings
This Standard Practice covers factory-made, seamless and electric welded carbon and low-alloy steel, butt-welding fittings for use in high pressure gas and oil transmission and distribution systems; including pipelines, compressor stations, metering and regulating stations, and mains.
This Standard Practice governs dimensions, tolerances, ratings, testing, materials, chemical and tensile properties, heat treatment, notch toughness properties, manufacture, inspection, certification, and marking for high-strength, butt-welding fittings NPS 60 and smaller.
With respect to minimum yield strength, MSS SP-75 pipe fittings can be further classified into 7 classes: WPHY-42, WPHY-46, WPHY-52, WPHY-56, WPHY-60, WPHY-65 and WPHY-70.
WP is the abbreviation for "wrought pipe" or "wrought plate" while HY stands for "high yield".
These WPHY pipe fittings can be supplied as long radius elbows, 3R elbows, straight tees, reducing tees, caps and reducers. They are typically used to connect to API 5L pipes or ASTM A694 forged pipe flanges.
MSS SP-75 Grade WPHY 60, 65, and 70 are used a lot in the high pressure oil and gas pipeline fittings, for WPHY-42, 46, 52 and 56, they are working in a medium-high pressure pipelines, so mostly client may choose with ASTM A234 WPB or WPC instead.
Chemical Composition MSS SP-75 Fittings
| Elements | Value, % |
| Carbon (C) | ≤0.30 |
| Manganese (Mn) | ≤1.60 |
| Phosphorus (P) | ≤0.035 |
| Sulfur (S) | ≤0.035 |
| Copper (Cu) | ≤0.50 |
| Nickel (Ni) | ≤0.50 |
| Silicon (Si) | ≤0.50 |
| Chromium (Cr) | ≤0.25 |
| Molybdenum (Mo) | ≤0.13 |
| Vanadium (V) | ≤0.13 |
| Columbium (Cb) | ≤0.10 |
| Titanium(Ti) | ≤0.05 |
Mechanical Properties MSS SP-75 Fittings
| MSS SP 75 Class | Yield Strength | Tensile Strength | Elongation |
| Min. psi | Min. psi | min. % | |
| WPHY-42 | 42000 | 60000 | 25 |
| WPHY-46 | 46000 | 63000 | 25 |
| WPHY-52 | 52000 | 66000 | 25 |
| WPHY-56 | 56000 | 71000 | 20 |
| WPHY-60 | 60000 | 75000 | 20 |
| WPHY-65 | 65000 | 77000 | 20 |
| WPHY-70 | 70000 | 82000 | 18 |
Dimensions and weight of elbow MSS SP 75 2019
All dimensions are in "mm" unless noted otherwise.
All weights are in "kg".a
Reducer dimensions are as per ASME B16.9
you may also check non standard sizes pipe fitting weight online calculation, pipe fitting surface area online calculation,pipe fitting surface volume online calculation from our pipeline tool link:
https://alloypipefitting.com/fitting-calculator.html
The whole weight and dimension list of pipe fitting directory
https://alloypipefitting.com/fitting-dimension-and-weight.html
Download the PDF file: MSS SP75 2019 dimension and weight.pdf

reducer_con_ecc2
- Dimensions are in millimeters unless otherwise indicated
- Wall thickness (t) must be specified by customer
| NPS D |
DN D |
Outside Diameter at Bevel |
End-to-End H |
|
| Large End D |
D1 | |||
| 16 x 14 | 400 x 350 | 406.4 | 355.6 | 356 |
| 16 x 12 | 400 x 300 | 406.4 | 323.8 | 356 |
| 16 x 10 | 400 x 250 | 406.4 | 273 | 356 |
| 16 x 8 | 400 x 200 | 406.4 | 219.1 | 356 |
| 18 x 16 | 450 x 400 | 457.2 | 406.4 | 381 |
| 18 x 14 | 450 x 350 | 457.2 | 355.6 | 381 |
| 18 x 12 | 450 x 300 | 457.2 | 323.8 | 381 |
| 18 x 10 | 450 x 250 | 457.2 | 273 | 381 |
| 20 x 18 | 500 x 450 | 508 | 457.2 | 508 |
| 20 x 16 | 500 x 400 | 508 | 406.4 | 508 |
| 20 x 14 | 500 x 350 | 508 | 355.6 | 508 |
| 20 x 12 | 500 x 300 | 508 | 323.8 | 508 |
| 22 x 20 | 550 x 500 | 558.8 | 508 | 508 |
| 22 x 18 | 550 x 450 | 558.8 | 457.2 | 508 |
| 22 x 16 | 550 x 400 | 558.8 | 406.4 | 508 |
| 22 x 14 | 550 x 350 | 558.8 | 355.6 | 508 |
| 24 x 22 | 600 x 550 | 609.6 | 558.8 | 508 |
| 24 x 20 | 600 x 500 | 609.6 | 508 | 508 |
| 24 x 18 | 600 x 450 | 609.6 | 457.2 | 508 |
| 24 x 16 | 600 x 400 | 609.6 | 406.4 | 508 |
| 26 x 24 | 650 x 600 | 660 | 610 | 610 |
| 26 x 22 | 650 x 550 | 660 | 559 | 610 |
| 26 x 20 | 650 x 500 | 660 | 508 | 610 |
| 26 x 18 | 650 x 450 | 660 | 457 | 610 |
| 28 x 26 | 700 x 650 | 711 | 660 | 610 |
| 28 x 24 | 700 x 600 | 711 | 610 | 610 |
| 28 x 22 | 700 x 550 | 711 | 559 | 610 |
| 28 x 20 | 700 x 500 | 711 | 508 | 610 |
| 28 x 18 | 700 x 450 | 711 | 457 | 610 |
| 30 x 28 | 750 x 700 | 762 | 711 | 610 |
| 30 x 26 | 750 x 650 | 762 | 660 | 610 |
| 30 x 24 | 750 x 600 | 762 | 610 | 610 |
| 30 x 22 | 750 x 550 | 762 | 559 | 610 |
| 30 x 20 | 750 x 500 | 762 | 508 | 610 |
| 32 x 30 | 800 x 750 | 813 | 762 | 610 |
| 32 x 28 | 800 x 700 | 813 | 711 | 610 |
| 32 x 26 | 800 x 650 | 813 | 660 | 610 |
| 32 x 24 | 800 x 600 | 813 | 610 | 610 |
| 34 x 32 | 850 x 800 | 864 | 813 | 610 |
| 34 x 30 | 850 x 750 | 864 | 762 | 610 |
| 34 x 28 | 850 x 700 | 864 | 711 | 610 |
| 34 x 26 | 850 x 650 | 864 | 660 | 610 |
| 34 x 24 | 850 x 600 | 864 | 610 | 610 |
| 36 x 34 | 900 x 850 | 914 | 864 | 610 |
| 36 x 32 | 900 x 800 | 914 | 713 | 610 |
| 36 x 30 | 900 x 750 | 914 | 762 | 610 |
| 36 x 28 | 900 x 700 | 914 | 711 | 610 |
| 36 x 26 | 900 x 650 | 914 | 660 | 610 |
| 36 x 24 | 900 x 600 | 914 | 610 | 610 |
| 38 x 36 | 950 x 900 | 965 | 914 | 610 |
| 38 x 34 | 950 x 850 | 965 | 864 | 610 |
| 38 x 32 | 950 x 800 | 965 | 813 | 610 |
| 38 x 30 | 950 x 750 | 965 | 762 | 610 |
| 38 x 28 | 950 x 700 | 965 | 711 | 610 |
| 38 x 26 | 950 x 650 | 965 | 660 | 610 |
| 38 x 24 | 950 x 600 | 965 | 660 | 610 |
| 38 x 22 | 950 x 550 | 965 | 660 | 610 |
| 38 x 20 | 950 x 500 | 965 | 660 | 610 |
| 40 x 38 | 1000 x 950 | 965 | 965 | 610 |
| 40 x 36 | 1000 x 900 | 1016 | 914 | 610 |
| 40 x 34 | 1000 x 850 | 1016 | 864 | 610 |
| 40 x 32 | 1000 x 800 | 1016 | 813 | 610 |
| 40 x 30 | 100 x 750 | 1016 | 762 | 610 |
| 40 x 28 | 1000 x 700 | 1016 | 711 | 610 |
| 40 x 26 | 1000 x 650 | 1016 | 660 | 610 |
| 40 x 24 | 1000 x 600 | 1016 | 610 | 610 |
| 40 x 22 | 1000 x 550 | 1016 | 559 | 610 |
| 40 x 20 | 1000 x 500 | 1016 | 508 | 610 |
| 42 x 40 | 1050 x 1000 | 1067 | 1016 | 610 |
| 42 x 38 | 1050 x 950 | 1067 | 965 | 610 |
| 42 x 36 | 1050 x 900 | 1067 | 914 | 610 |
| 42 x 34 | 1050 x 850 | 1067 | 864 | 610 |
| 42 x 32 | 1050 x 800 | 1067 | 813 | 610 |
| 42 x 30 | 1050 x 750 | 1067 | 762 | 610 |
| 42 x 28 | 1050 x 700 | 1067 | 711 | 610 |
| 42 x 26 | 1050 x 650 | 1067 | 660 | 610 |
| 42 x 24 | 1050 x 600 | 1067 | 610 | 610 |
| 42 x 22 | 1050 x 550 | 1067 | 559 | 610 |
| 44 x 42 | 1100 x 1050 | 1118 | 1067 | 610 |
| 44 x 40 | 1100 x 1000 | 1118 | 1016 | 610 |
| 44 x 38 | 1100 x 950 | 1118 | 965 | 610 |
| 44 x 36 | 1100 x 900 | 1118 | 914 | 610 |
| 44 x 34 | 1100 x 850 | 1118 | 864 | 610 |
| 44 x 32 | 1100 x 800 | 1118 | 813 | 610 |
| 44 x 30 | 1100 x 750 | 1118 | 762 | 610 |
| 44 x 28 | 1100 x 700 | 1118 | 711 | 610 |
| 44 x 26 | 1100 x 650 | 1118 | 660 | 610 |
| 44 x 24 | 1100 x 600 | 1118 | 610 | 610 |
| 44 x 22 | 1100 x 550 | 1118 | 559 | 610 |
| 46 x 44 | 1150 x 1100 | 1168 | 1118 | 711 |
| 46 x 42 | 1150 x 1050 | 1168 | 1067 | 711 |
| 46 x 40 | 1150 x 1000 | 1168 | 1016 | 711 |
| 46 x 38 | 1150 x 950 | 1168 | 965 | 711 |
| 46 x 36 | 1150 x 900 | 1168 | 914 | 711 |
| 46 x 34 | 1150 x 850 | 1168 | 864 | 711 |
| 46 x 32 | 1150 x 800 | 1168 | 813 | 711 |
| 46 x 30 | 1150 x 750 | 1168 | 762 | 711 |
| 46 x 28 | 1150 x 700 | 1168 | 711 | 711 |
| 46 x 26 | 1150 x 650 | 1168 | 660 | 711 |
| 46 x 24 | 1150 x 600 | 1168 | 610 | 711 |
| 48 x 46 | 1200 x 1150 | 1219 | 1168 | 711 |
| 48 x 44 | 1200 x 1110 | 1219 | 1118 | 711 |
| 48 x 42 | 1200 x 1050 | 1219 | 1067 | 711 |
| 48 x 40 | 1200 x 1000 | 1219 | 1016 | 711 |
| 48 x 38 | 1200 x 950 | 1219 | 965 | 711 |
| 48 x 36 | 1200 x 900 | 1219 | 914 | 711 |
| 48 x 34 | 1200 x 850 | 1219 | 864 | 711 |
| 48 x 32 | 1200 x 800 | 1219 | 813 | 711 |
| 48 x 30 | 1200 x 750 | 1219 | 762 | 711 |
| 48 x 28 | 1200 x 700 | 1219 | 711 | 711 |
| 48 x 26 | 1200 x 650 | 1219 | 660 | 711 |
| 48 x 24 | 1200 x 600 | 1219 | 610 | 711 |
| 50 x 48 | 1250 x 1200 | 1270 | 1219 | 711 |
| 50 x 42 | 1250 x 1050 | 1270 | 1067 | 711 |
| 50 x 36 | 1250 x 900 | 1270 | 914 | 711 |
| 50 x 30 | 1250 x 750 | 1270 | 762 | 711 |
| 50 x 24 | 1250 x 600 | 1270 | 610 | 711 |
| 50 x 20 | 1250 x 500 | 1270 | 508 | 711 |
| 52 x 50 | 1300 x 1250 | 1321 | 1270 | 711 |
| 52 x 48 | 1300 x 1200 | 1321 | 1219 | 711 |
| 52 x 42 | 1300 x 1050 | 1321 | 1067 | 711 |
| 52 x 36 | 1300 x 900 | 1321 | 914 | 711 |
| 52 x 30 | 1300 x 750 | 1321 | 762 | 711 |
| 52 x 24 | 1300 x 600 | 1321 | 610 | 711 |
| 54 x 52 | 1350 x 1300 | 1372 | 1321 | 711 |
| 54 x 48 | 1350 x 1200 | 1372 | 1219 | 711 |
| 54 x 42 | 1350 x 1050 | 1372 | 1067 | 711 |
| 54 x 36 | 1350 x 900 | 1372 | 914 | 711 |
| 54 x 30 | 1350 x 750 | 1372 | 762 | 711 |
| 54 x 24 | 1350 x 600 | 1372 | 610 | 711 |
| 56 x 54 | 1400 x 1350 | 1422 | 1372 | 711 |
| 56 x 48 | 1400 x 1200 | 1422 | 1219 | 711 |
| 56 x 42 | 1400 x 1050 | 1422 | 1067 | 711 |
| 56 x 36 | 1400 x 900 | 1422 | 914 | 711 |
| 56 x 30 | 1400 x 750 | 1422 | 762 | 711 |
| 56 x 24 | 1400 x 600 | 1422 | 610 | 711 |
| 58 x 56 | 1450 x 1400 | 1473 | 1422 | 711 |
| 58 x 54 | 1450 x 1350 | 1473 | 1372 | 711 |
| 58 x 48 | 1450 x 1200 | 1473 | 1219 | 711 |
| 58 x 42 | 1450 x 1050 | 1473 | 1067 | 711 |
| 58 x 36 | 1450 x 900 | 1473 | 914 | 711 |
| 58 x 30 | 1450 x 750 | 1473 | 762 | 711 |
| 60 x 58 | 1500 x 1450 | 1524 | 1473 | 711 |
| 60 x 54 | 1500 x 1350 | 1524 | 1372 | 711 |
| 60 x 48 | 1500 x 1200 | 1524 | 1219 | 711 |
| 60 x 42 | 1500 x 1050 | 1524 | 1067 | 711 |
| 60 x 36 | 1500 x 900 | 1524 | 914 | 711 |
| 60 x 30 | 1500 x 750 | 1524 | 762 | 711 |
- Dimensions are in millimeters unless otherwise indicated
- Wall thickness (t) must be specified by customer
Dimensional Tolerances MSS SP-75
| NPS | Inside Diameter at End | Out of Roundness | ||
| At Ends of Fittings | Throughout body of Elbows | |||
| Elbows | Other | |||
| 16-24 | ±2.29 | 4.83 | 3.05 | 2.5% |
| 26-36 | ±2.29 | *A | 3.05 | 2.5% |
| 38-48 | ±3.05 | *A | 3.05 | 2.5% |
| 50-60 | ±6.35 | *A | 3.05 | 2.5% |
*A Out-Of-Roundness Tolerances At Ends Shall Be 1% Of Diameter For NPS26 And Larger
| NPS | 90°-45° Elbows LR Cte |
Tees Cte |
Reducers Length |
Caps Length |
| 16-24 | ±2.29 | ±2.29 | ±2.29 | ±6.35 |
| 26-36 | ±3.05 | ±3.05 | ±4.83 | ±9.65 |
| 38-48 | ±4.83 | ±4.83 | ±9.65 | ±9.65 |
| 50-60 | ±6.35 | ±6.35 | ±9.65 | ±9.65 |
Cte = Center To End Dimension
| NPS | Angularity off Angle Q | Elbows Off Plane P | Eccentric and Concentric Reducers Off Plane *B |
| 16-24 | 2.29 | 6.35 | 2.5% |
| 26-36 | 2.29 | 12.70 | 2.5% |
| 38-48 | 3.05 | 19.05 | 2.5% |
| 50-60 | 4.80 | 19.05 | 2.5% |
*B Values That Are Percent Of O.D.
Dimensional Tolerances Are In Millimeters Unless Otherwise Indicated