JIS G3454 Carbon steel pipes for pressure service

pipe fittings materials data

you may also check non standard sizes pipe fitting weight online calculation, pipe fitting surface area online calculation,pipe fitting surface volume online calculation from our pipeline tool link:

https://alloypipefitting.com/fitting-calculator.html

For the pipe fitting material, please check butt-weld-fitting-standard-data

1. Scope

This Japanese Industrial Standard specifies the carbon steel pipes, hereinafter referred to as the “pipes”, used for pressure service at an approximate maximum temperature of 350℃. The pipes for high pressure service shall be in accordance with JIS G 3455.

Remarks

1.Pertaining to the electric-resistance welded steel tubes, when previously agreed upon with the manufacturer, the purchaser may designate the supplementary quality requirements Z 3 or Z 4 specified in Appendix, in addition to the items specified in this text.

Appendix Z 3 Ultrasonic Examination

Appendix Z 4 Eddy Current Examination.

2. The units and numerical values given in { } in this Standard are based on the international System of Units (SI) and are appended for informative reference.

Further, the traditional units accompanied by numerical values in this Standard shall be converted to the SI units and numerical values on Jan. 1, 1991.

2. Grade and Designation

The pipe shall be classified into two grades and their letter symbols shall be as given in Table 1-1 or Table 1-2.

C&N Huitong group can produce pipe fittings of such materials :

ASTM Standard MaterialASTM A53 A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A106 A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
API 5L Specification for Line Pipe
ASTM A213 2018 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A312 A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A234 A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A403 A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A420 A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A860 A860M Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
ASTM A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
DIN Standard MaterialDIN1629 Seamless Circular Unalloyed Steel Tubes Subject to special requirements
DIN 2440 Medium-weight threaded steel tubes
DIN 2441 Steel Tubes Heavy Weight For Suitable For Screwing
GOST Standard MaterialGOST-1050 Sized Bars Made of High-Quality Structural Carbon Steel With a Special Surface Finish
GOST 8732 Seamless hot-deformed steel pipes-Range of sizes
GOST 19281 Rolled Steel With Enhanced Strength
JIS Standard MaterialJIS G3452 Carbon steel pipes for ordinary piping
JIS G3454 Carbon steel pipes for pressure service
JIS G3455 Carbon steel pipes for high pressure service
JIS G3456 Carbon steel pipes for high temperature service
JIS G3457 Arc welded carbon steel pipes
JIS G3458 Alloy Steel Pipes
JIS G3459 Stainless steel pipes
JIS G3460 Steel pipes for low temperature service
BS EN Standard MaterialBS EN 10255 Non-alloy steel tubes suitable for welding and threading Technical delivery conditions
BS EN 10253-1 Butt-Welding Pipe Fittings  Part 1: Wrought Carbon Steel for General Use and Without Specific Inspection Requirements
BS EN 10253-2 Butt-welding pipe fittings. part 2: Non alloy ferritic alloy steels with specific inspection requirements
BS EN10253-3 Butt-welding pipe fittings Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
BS EN 10253-4 Butt-welding pipe fittings Part 4:Wrought austenitic and austenitic-ferritic (duplex)stainless steels with specific inspection requirements