What is MSS SP 75?
MSS SP 75 is the standard specification for high-test, wrought, butt-welding fittings which covers factory-made seamless and electric fusion-welded carbon and low-alloy steel butt-welding pipe fittings for use in high-pressure oil and gas transmission and distribution systems, including pipelines, compressor stations, metering and regulating stations, and mains. In term of minimum yield strength, MSS SP 75 pipe fittings can be further categorized into 7 classes: WPHY-42, WPHY-46, WPHY-52, WPHY-56, WPHY-60, WPHY-65, and WPHY-70. “WP” is the abbreviation for “wrought pipe” or “wrought plate” while “HY” stands for “high yield”. These WPHY pipe fittings can be furnished as long-radius elbows, 3R elbows, straight tees, reducing tees, caps and reducers. They are usually used for the joint with API 5L pipes or ASTM A694 forged pipe flanges.
Chemical Composition Requirements of MSS SP 75
| Elements | Value, % |
|---|---|
| Carbon (C) | ≤0.30 |
| Manganese (Mn) | ≤1.60 |
| Phosphorus (P) | ≤0.035 |
| Sulfur (S) | ≤0.035 |
| Copper (Cu) | ≤0.50 |
| Nickel (Ni) | ≤0.50 |
| Silicon (Si) | ≤0.50 |
| Chromium (Cr) | ≤0.25 |
| Molybdenum (Mo) | ≤0.13 |
| Vanadium (V) | ≤0.13 |
| Columbium (Cb) | ≤0.10 |
| Titanium(Ti) | ≤0.05 |
Mechanical Properties of MSS SP 75 Pipe Fittings
| MSS SP 75 Class | Yield Strength | Tensile Strength | Elongation | Charpy Test |
| Min. psi | Min. psi | min. % | Ave. Energy absorbed @ 20°F | |
| WPHY-42 | 42000 | 60000 | 25 | ≥20ft*lbs |
| WPHY-46 | 46000 | 63000 | 25 | |
| WPHY-52 | 52000 | 66000 | 25 | |
| WPHY-56 | 56000 | 71000 | 20 | |
| WPHY-60 | 60000 | 75000 | 20 | |
| WPHY-65 | 65000 | 77000 | 20 | |
| WPHY-70 | 70000 | 82000 | 18 |
Material, Welding & Manufacture
The raw material of MSS SP 75 pipe fittings shall be fully killed steels made by either open hearth, basic oxygen, or electric furnace process. It consists of blooms, billets, slabs, forging quality bar, plate, seamless or fusion-welded pipes. The welding processes shall be conducted in accordance with Section IX of ASME Boiler and Pressure Vessel Code, or related ASTM & API specifications. Post-weld heat treatment shall be taken in accordance with the requirements of Section VIII, Division 1 of ASME Boiler and Pressure Vessel Code. The welding ends (bevels) of the fitting shall be furnished differently in terms of wall thickness.
The MSS SP 75 WPHY pipe fittings may be readily manufactured by forging, hammering, pressing, piercing, rolling, extruding, upsetting, welding, or by a combination of these processes. Finished products shall be free of injurious defect or welding-repair. Machining and grinding of surface defects may be required by some clients.
Heat Treatment
Pipe fittings manufactured to MSS SP 75 shall be furnished in the heat treated condition. Hot formed fittings shall be cooled below the lower critical temperature prior to heat treatment. Fittings shall be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.
Tests and Examinations
The tests and examinations available for WPHY fittings includes hydrostatic test(proof test), tensile tests, PMI(spectrum), Charpy test, radiographic examination(X-Rays, RT), magnetic particles inspection(MPI), ultrasonic examination(UT), Liquid Penetration Examination(LPE), etc.
Dimensions and Tolerances
MSS SP 75 only specifies the dimensions and tolerances for pipe fittings sized from NPS 16 (DN 400) through NPS 60 (DN 1500). Dimensional requirements for NPS 14 and smaller are provided by reference to ASME B 16.9.
| Dimensions of MSS SP 75 Butt-welding Pipe Fittings | ||
|---|---|---|
| Long-Radius Elbows | 3R Elbows | Straight Tees |
| Reducing Tees | Caps | Reducers |
Hello. This is Mary Marks, Project Managers of AlphaBahaar Co, a General Trading Co in UAE. I kindly request you provide me with a detailed price quotation for:
Some Carbon Steel Elbows. Could you please kindly contact me via WhatsApp due to me issues with email due to domain expiry.
WatsApp: +971561060353
1. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 8″ NPS (OD 219.1 mm), Center-to-End 305 mm, Pipe Wall Thickness 9.52 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
2. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 10″ NPS (OD 273.1 mm), Center-to-End 381 mm, Pipe Wall Thickness 7.80 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
3. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 12″ NPS (OD 323.9 mm), Center-to-End 457 mm, Pipe Wall Thickness 8.74 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
4. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 16″ NPS (OD 406.4 mm), Center-to-End 609.5 mm, Pipe Wall Thickness 9.52 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
5. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 18″ NPS (OD 406.4 mm), Center-to-End 686 mm, Pipe Wall Thickness 7.92 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X60, hydrotested, weld ends to match pipe wall thickness, marked with 50 mm red paint on the inside surface at each end.
6. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 20″ NPS (OD 508 mm), Center-to-End 762 mm, Pipe Wall Thickness 8.74 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
7. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 24″ NPS (OD 609.6 mm), Center-to-End 914 mm, Pipe Wall Thickness 9.52 mm, MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
8. 90° Seamless Carbon Steel Long Radius Elbow, 6″ NPS (OD 168.3 mm), Center-to-End 228.5 mm, Pipe Wall Thickness 7.1 mm (SCH 40), ASTM A234 WPB, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L GR. B, weld ends to match pipe wall thickness.
9. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 10″ NPS (OD 273.1 mm), Center-to-End 381 mm, Pipe Wall Thickness 8.0 mm (SCH 30), MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
10. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 12″ NPS (OD 323.9 mm), Center-to-End as per standard for 12″ LR elbow, Pipe Wall Thickness approx. 8.74 mm (SCH 30), MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
11. 90° Long Radius High-Yield Forged Low Alloy Carbon Steel Elbow, 16″ NPS (OD 406.4 mm), Center-to-End 609.5 mm, Pipe Wall Thickness 9.5 mm (SCH 30), MSS-SP75, C.E. ≤ 0.52%, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L X52/X60, hydrotested, weld ends to match pipe wall thickness.
12. 90° Long Radius Seamless Carbon Steel Elbow, 20″ NPS (OD 508 mm), Center-to-End 762 mm, Pipe Wall Thickness 9.5 mm (SCH 20), ASTM A234 WPB, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L GR.B, weld ends to match pipe wall thickness.
13. 90° Long Radius Seamless Carbon Steel Elbow, 30″ NPS (OD 762 mm), Center-to-End 1143 mm, Pipe Wall Thickness 9.5 mm (STD), ASTM A234 WPB, ANSI B16.9 dimensions and tolerances, suitable for piggable pipeline service up to API 5L GR. B, weld ends to match pipe wall thickness.
I’m truly sorry. I just saw your message now. I’ll contact you right away.