Pipe Plug

The Steel Pipe Plug is a pipe fitting that is inserted into the end of the pipe. It has only male thread type. And can be divided into hex head plug, round head plug and square head plug. The head shape influences its weight.

Threaded plug is ASME B16.11 Forged Fittings. But it is not classified by pressure rating.

Threaded Plug Dimension

Threaded Plug Dimension

Threaded Plug Dimension

Standard ASME B16.11
Diameter 1/8inch to 4 inch, DN6-DN100
Pressure 2000#, 3000#, 6000#
Threaded Type FNPT, BSPP, BSPT
Stainless Steel Threaded Plug ASTM A182 F304/304L, F316/316L, F310
Carbon Steel Threaded Plug ASTM A105, A694 F42, F52, F60
Alloy Steel Threaded Plug ASTM A182 F1, F5, F11, F22, F91

Pipe Plug Weight

DN NPS Approximate Weight/ kg
Hex head Round head Square head
6 1/8 0.01 0.02 0.01
8 1/4 0.02 0.05 0.01
10 3/8 0.04 0.07 0.03
15 1/2 0.06 0.13 0.05
20 3/4 0.12 0.19 0.08
25 1 0.22 0.37 0.17
32 1 1/4 0.43 0.54 0.28
40 1 1/2 0.54 0.68 0.4
50 2 1.09 1.45 0.63
65 2 1/2 1.72 – 1
80 3 2.18 – 1.54
100 4 5.9 – 3.85

Blind Flange

They are covered at the end of the tube and connected by bolts and gasket. Compared with other forged flanges, it has only bolt holes. But they are all ASME B16.5 flanges.

Spectacle Blind is a kind of blind flange with 8 shape. It has a blind plate on one side, and the other side is a throttling ring which has no throttling effect actually. The throttle end can be used when normal operation is required and to fill the installation clearance.

ASME B16.5 Blind Flanges Dimension

ASME B16.5 Blind Flange Dimension

ASME B16.5 Blind Flange Dimension

Pressure 150# , 300# , 600#, 900# , 1500#
Diameter DN 15- DN600, NPS 1/2- NPS24
Stainless Steel Flange A182 F316/316L, F304/304L, A240 Gr 316, 304, 309, 321, 310
Carbon Steel Flange A105, A181 LF2, A516 Gr 70
Alloy Steel Flange A182 F1, F5, F9, F11, F22, F91

Difference between Pipe Cap and Pipe Plug and Blind Flange

  1. These Pipe Caps and Threaded Plugs are pipe fittings, blind flange is pipe flange.
  2. Standard.
  3. Size range and pressure rating. Butt weld cap has the largest size range and Schedule. And then Blind Flange.
  4. Connection way.
  5. Blind flange is tightly sealed and easy to disassemble. Others have to be cut off when they are removed.

What is ASME Standard?

ASME standards cover the specifications, tolerances, marking, and testing requirements for pipe fittings and flanges.

For example, ASME B16.11 covers forged socket weld and threaded pipe fittings.

While ASME B16.9 is for wrought factory-made butt-weld pipe fittings.

For ASME B16.5, it is forged flange standard.

These are all American standards approved by the American Society of Mechanical Engineering.